These pads are made specifically for use with all air drying inks. They are designed and constructed to prevent the ink from drying out on the pad when not in use. The pads come in pairs, allowing two people to work with one pair at the same time. When not in use, one half of the pair rests on top of the other half, leaving it constantly ready for instant use. It is suggested that the pads be stored in airtight plastic bags overnight or for extended periods in order to preserve their quality over time.

#1-OP 2” x 3”
#2-OP 3” x 4”
#3-OP 3” x 6”

This is the only stamp pad that can be used with solvent/acid based industrial marking inks without destroying the pad. A constant flow of ink from the porous stone helps create high quality, non-smear impressions. Most commonly used to print on circuit boards or machine parts. Can not be used with pigmented inks such as #432, 652 or 1045.

#1-SP 1-1/4” DIAMETER
#2-SP 1-3/4” DIAMETER
#3-SP 2-1/2” X 4”

Specially designed for fast-drying inks, Mark II pads feature an air-tight case that keeps the pad moist for months. A two-sided design allows you to flip the pad over and continue stamping while the other side rejuvenates. It’s like having two pads in one and ensures a constant ink supply. The pad is available dry or pre-inked in black, blue, red, green, silver, white and yellow. #1250 ink is specifically formulated for use on the Mark II stamp pad.

MARK II PAD 2-1/2” X 4”

These pads are designed primarily for water based stamp inks. They are available in cloth covered felt. Felt pads should not be used with many air dry inks as the solvents can have an adverse effect on the plastic and the pads will dry out very quickly.

#00: 2” X 3”
#1: 2-1/2” X 4-1/4”
#2: 3-1/4” X 6-1/8”
#3: 4-1/4” X 7-3/8”